In Short
Jaymin Impex manufactures CP (Chemical Pallet) export pallets from our Ankleshwar, Gujarat facility for chemical, dye and agrochemical exporters shipping bagged, drummed and bulk-container cargo out of the Gujarat chemical belt. Every pallet is heat treated in-house to ISPM 15 and stamped for export.
A CP pallet is a block-style wooden pallet built to one of nine standard sizes (CP1–CP9), originally set by Europe’s chemical industry for bagged, drummed and bulk-container freight. Four-way forklift entry, closed block construction and tight dimensional tolerance make CP pallets the default specification for chemical and agrochemical exports.
CP1–CP9
standard chemical pallet sizes
ISPM 15
in-house FHAT treatment
30,000
CP1–CP9: dimensions and typical use
Buyers usually name a CP type on their purchase order or packing specification. The table below is a quick reference share the buyer’s spec sheet and we will confirm an exact match.
| Type | Dimensions (mm) | Typical use |
|---|---|---|
| CP1 | 1200 × 1000 | Bagged chemicals, big bags |
| CP2 | 1200 × 800 | Sacks, small containers |
| CP3 | 1140 × 1140 | Drums, barrels |
| CP4 | 1300 × 1100 | Lightweight drums, sacks |
| CP5 | 1100 × 1300 | Reusable transport packaging |
| CP6 | 1200 × 1000 | High stack loads (centre stringer) |
| CP7 | 1300 × 1100 | Drums, dimensionally critical loads |
| CP8 | 1140 × 1140 (with hole) | Octabins, large containers |
| CP9 | 1140 × 1140 (double deck + hole) | Octabins, bulk powders |
See individual product pages for CP1, CP3 and CP9, or the full wooden pallets range.
Is a CP pallet the same as an ISPM 15 pallet?
No. CP defines the pallet’s size and construction; ISPM 15 is the separate international phytosanitary standard requiring wooden packaging to be heat treated and stamped before export. A CP pallet still needs ISPM 15 treatment, the two specifications are independent, and a shipment can be rejected at port if either one is missing.
We treat every pallet in-house through our own forced hot air treatment (FHAT) chamber rather than outsourcing treatment, which is what keeps CP pallet lead times predictable. More detail on the ISPM 15 certified pallet page.
CP pallet vs standard wooden pallet
A standard export pallet, such as a GMA-style stringer pallet, uses open stringers and looser tolerances, built for general cargo.
A CP pallet uses closed block construction with tighter dimensional control, because chemical drums and big bags need a stable, flush deck and four-way entry for forklifts and pallet jacks on both the export and import side.
Why Ankleshwar and Panoli exporters need CP pallets
Ankleshwar sits inside Gujarat’s largest chemical manufacturing cluster, alongside the Panoli, Jhagadia and Dahej GIDC estates, where dyes, pigments, specialty chemicals and agrochemicals are packed into drums, bags and bulk containers for export.
European and North American buyers in these sectors frequently write CP-pallet compliance and ISPM 15 treatment into their purchase terms, so a mismatch on either specification can hold a container at the port rather than at the factory gate.
Sourcing locally? See our chemical pallet supply for Ankleshwar, Panoli GIDC and Dahej SEZ.
Our CP pallet manufacturing standards
- In-house ISPM 15 heat treatment (FHAT chamber) no dependency on a third-party treatment vendor or its schedule
- Timber sourced and graded before cutting, reducing warping and moisture-related rejections at the destination port
- Batch-wise dimensional checks against the buyer's CP spec sheet before dispatch
- IPPC stamp placement and documentation prepared to match the paperwork chemical buyers present at customs
- Based in GIDC Ankleshwar short lead distance to Panoli, Jhagadia, Dahej and Bharuch loading points
Checklist before ordering CP pallets for export
- Confirm the exact CP type (CP1–CP9) against the buyer's spec sheet, not just "chemical pallet"
- Confirm ISPM 15 stamp position and that the treatment certificate will accompany the shipment
- Check timber moisture content and load capacity against your product weight
- Ask for MOQ and lead time in writing before confirming the export schedule
- Request a sample or reference batch if this is a new buyer relationship
CP pallet FAQs
What is a CP pallet used for?
A CP pallet is used to export bagged, drummed and bulk-packed chemicals, dyes and agrochemicals. Its block construction and standard sizing (CP1–CP9) meet the specifications many European and North American chemical buyers require for inbound shipments.
Do CP pallets need ISPM 15 treatment?
Yes. CP defines the pallet’s size and build; ISPM 15 is the separate heat-treatment standard every wooden pallet needs for international export. A CP pallet must still carry the IPPC stamp confirming heat treatment before it can be exported.
Which CP pallet sizes does Jaymin Impex manufacture in Gujarat?
We manufacture CP pallets at our Ankleshwar unit, built to the block dimensions each type requires, with in-house ISPM 15 heat treatment. Share your buyer’s spec sheet and we will confirm the CP types we can supply for your order.
What is the minimum order quantity for CP pallets?
Minimum order quantity depends on the CP type and timber specification. Share your buyer’s pallet spec sheet and shipment volume, and we will confirm MOQ, pricing and lead time for that batch.
How long does it take to get export-ready CP pallets from Ankleshwar?
Lead time depends on order volume, CP type and current production load. Because heat treatment is done in-house rather than outsourced, we can confirm a firm dispatch date at the time of quotation.
Get a CP pallet quote from Ankleshwar, Gujarat
Share your CP type, quantity and shipment timeline, and we will confirm pricing, ISPM 15 documentation and a dispatch date for your export order.
